powerdi is a registered tr ademark of diodes incorporated. DXT790AP5 document number: ds31800 rev. 3 - 2 1 of 7 www.diodes.com june 2013 ? diodes incorporated DXT790AP5 a product line of diodes incorporated 40v pnp high gain transistor p ower di ? features ? bv ceo > - 40v ? i c = - 3a high continuous collector current ? i cm = - 6a peak pulse current ? 43% smaller than sot223; 60% smaller than to252 ? maximum h eight j ust 1.1mm ? rated up to 3.2w ? low saturation, h igh g ain t ransistor, ? totally lead - free & fully rohs compliant (note s 1 & 2 ) ? halogen and antimony free. ?green? device (note 3) ? qualified to aec - q101 standards for high reliability mechanical data ? case: powerdi 5 ? case material: molded plastic, ?green? molding compound. ul flammability classification rating 94v -0 ? moisture sensitivity: level 1 per j - std - 020 ? terminals: finish ? matte tin annealed over copper leadframe. solderable per mil - std - 202, method 208 ? weight: 0.093 grams (approximate) ordering information (note 4) product marking reel size (inches) tape width (mm) quantity per reel DXT790AP5 - 13 dxt790a 13 16 5,000 note s: 1 . no purposely added lead. fully eu directive 2002/95/ec (rohs) & 2011/65/eu (rohs 2) compliant. 2. see http://www.diodes.com/quality/lead_free.html for more information about diodes incorporated?s definitions of hal ogen - and antimony - free, "green" and lead -f ree . 3. halogen - and antimony - free "green? products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total br + cl) and <1000ppm antimony compounds. 4 . for packaging details, go to our website at http : // www.diodes.com/products/packages.html marking information top view bottom view device schematic top view pin out c b e dxt790a = product type marking code = manufacturers? code marking k = factory designator yyww = date code marking yy = last two digits of year (ex: 09 for 2009) ww = week code (01 to 53) yywwk dxt790a powerdi5 e3
powerdi is a registered tr ademark of diodes incorporated. DXT790AP5 document number: ds31800 rev. 3 - 2 2 of 7 www.diodes.com june 2013 ? diodes incorporated DXT790AP5 a product line of diodes incorporated maximum ratings (@ t a = +25c, unless otherwise specified.) characteristic symbol value unit collector - base voltage v cbo - 50 v collector - emitter voltage v ceo - 40 v emitter - base voltage v ebo -6 v continuous collector current i c -3 a peak pulse current i cm -6 a base current i b - 0.5 a thermal characteristics (@ t a = +25c, unless otherwise specified.) characteristic symbol value unit power dissipation (note 5) p d 3.2 w ( note 6) 1.7 ( note 7) 0.74 thermal resi stance, junction to ambient air (note 5) r ja 39 c/w ( note 6 ) 75 ( note 7) 169 thermal resistance, junction to lead (note 8) r j l 8.9 c/w operating and storage temperature range t j , t stg - 55 to +150 c notes: 5 . for a device mounted with the exposed collector pad on 50 mm x 50 mm 2 oz copper that is on a single - sided 1.6mm fr4 pcb ; device is measured under still air conditions whilst operating in a steady - state. 6 . same as note ( 5 ), except the device is mounted on 25mm x 25mm 1oz copper. 7. same as note (5), except the device is mounted on minimum recommended pad (mrp) layout 1oz copper. 8. thermal resistance from junction to solder - point (on the exposed collector pad).
powerdi is a registered tr ademark of diodes incorporated. DXT790AP5 document number: ds31800 rev. 3 - 2 3 of 7 www.diodes.com june 2013 ? diodes incorporated DXT790AP5 a product line of diodes incorporated thermal characteristics and derating information 10 100 1000 10000 20 40 60 80 100 120 140 160 180 10 100 1000 10000 0 1 2 3 4 100m 1 10 10m 100m 1 10 single pulse. t a =25c 50mm x 50mm 2oz cu v ce(sat) limited 100s 1ms 10ms 100ms 1s dc safe operating area -i c collector current (a) -v ce collector-emitter voltage (v) 0 25 50 75 100 125 150 175 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 mrp 1oz 25mm x 25mm 1oz cu 50mm x 50mm 2oz cu derating curve ambient temperature (c) max power dissipation (w) 100 1m 10m 100m 1 10 100 1k 0 10 20 30 40 power rating vs. cu area thermal resistance vs. cu area 50mm x 50mm 2oz cu transient thermal impedance d=0.5 d=0.2 d=0.1 single pulse d=0.05 thermal resistance (c/w) pulse width (s) 100 1m 10m 100m 1 10 100 1k 1 10 100 single pulse. t a =25c 50mm x 50mm 2oz cu pulse power dissipation pulse width (s) max power dissipation (w) 2 oz cu t a =25c copper area (sq mm) thermal resistance (c/w) 1 oz cu 1 oz cu 2 oz cu power rating (w) copper area (sq mm) t a =25c
powerdi is a registered tr ademark of diodes incorporated. DXT790AP5 document number: ds31800 rev. 3 - 2 4 of 7 www.diodes.com june 2013 ? diodes incorporated DXT790AP5 a product line of diodes incorporated electrical characteristics (@ t a = +25c, unless otherwise specified.) characteristic symbol min typ max unit test condition off characteristics collector - base breakdown voltage bv cbo - 50 ? ? v i c = - 100 a, i e = 0 collector - emitter breakdown voltage (note 8) bv ceo - 40 ? ? v i c = - 10ma, i b = 0 emitter - base breakdown voltage bv ebo -6 ? ? v i e = - 100 a, i c = 0 collector cutoff current i cbo ? ? - 20 na v cb = - 30 v, i e = 0 collector cutoff current i ces ? ? - 20 na v cb = - 30 v, v b e = 0 emitter cutoff current i ebo ? ? - 20 na v eb = - 4v, i c = 0 on characteristics (note 8) collector - emitter saturation voltage v ce( sat) ? ? ? ? ? ? ? ? - 170 - 350 - 450 - 450 mv i c = - 0.5 a, i b = -5 ma i c = -1 a, i b = -1 0ma i c = -2 a, i b = -5 0ma i c = - 3a, i b = - 3 00ma base - emitter saturation voltage v be( sat) ? ? - 1.15 v i c = -3 a, i b = - 300 ma base - emitter turn - on voltage v be( on) ? ? - 1.0 v i c = -3a , v ce = - 2v dc current gain h fe 300 250 200 1 50 80 ? ? ? ? ? 800 ? ? ? ? ? i c = - 10ma , v ce = - 2v i c = - 50 0ma , v ce = - 2v i c = - 1a , v ce = - 2v i c = - 2a , v ce = - 2v i c = -3a , v ce = - 2v ac characteristics transition frequency f t 100 ? ? mhz i c = - 50ma, v ce = - 5v, f = 5 0mhz output capacitance c obo ? 24 ? pf v cb = - 10v, f = 1mhz switching times t on t off ? ? 35 6 00 ? ? ns ns i c = - 500ma, v cc = - 10v, i b1 = -i b2 = - 50ma notes: 8 . measured under pulsed conditions. pulse width 300 s. duty cycle 2%.
powerdi is a registered tr ademark of diodes incorporated. DXT790AP5 document number: ds31800 rev. 3 - 2 5 of 7 www.diodes.com june 2013 ? diodes incorporated DXT790AP5 a product line of diodes incorporated typical electrical characteristics (@ t a = +25c, unless otherwise specified.) 1m 10m 100m 1 10 10m 100m 1 1m 10m 100m 1 0.0 0.2 0.4 0.6 0.8 1.0 1m 10m 100m 1 10 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1m 10m 100m 1 10 0.4 0.6 0.8 1.0 1m 10m 100m 1 10 0.2 0.4 0.6 0.8 1.0 0 90 180 270 360 450 540 630 v ce(sat) v i c tamb=25c i c /i b =100 i c /i b =40 i c /i b =10 -v ce(sat) (v) -i c collector current (a) v be(sat) v i c i c /i b =100 100c 25c -55c -v ce(sat) (v) -i c collector current (a) h fe v i c v ce =-2v -55c 25c 100c normalised gain -i c collector current (a) i c /i b =100 25c v ce(sat) v i c 100c -55c -v be(sat) (v) -i c collector current (a) v be(on) v i c v ce =-2v 100c 25c -55c -v be(on) (v) -i c collector current (a) typical gain (h fe )
powerdi is a registered tr ademark of diodes incorporated. DXT790AP5 document number: ds31800 rev. 3 - 2 6 of 7 www.diodes.com june 2013 ? diodes incorporated DXT790AP5 a product line of diodes incorporated package outline dimensions please see ap02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version. suggested pad layout please see ap02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version. powerdi 5 dim min max a 1.05 1.15 a2 0.33 0.43 b1 0.80 0.99 b2 1.70 1.88 d 3.90 4.05 d2 3.054 typ e 6.40 6.60 e 1.84 typ e1 5.30 5.45 e2 3.549 typ l 0.75 0.95 l1 0.50 0.65 w 1.10 1.41 all dimensions in mm dimensions value (in mm) c 1.840 g 0.852 x 3.360 x1 1.390 y 4.860 y1 1.400 e e1 b1 a a2 a2 d b2 b1 e d2 l e2 l1 w g x c y1 (2x) y x1 (2x)
powerdi is a registered tr ademark of diodes incorporated. DXT790AP5 document number: ds31800 rev. 3 - 2 7 of 7 www.diodes.com june 2013 ? diodes incorporated DXT790AP5 a product line of diodes incorporated important notice diodes incorporated makes no warranty of any kind, express or implied, with regards to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose (and their equivalents under the laws of any jurisdiction). diodes incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. diodes incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does diodes incorporated convey any license under its patent or trademark rights, nor the rights of others. any customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold diodes incorporated and all the companies whose products are represented on diodes incorporated website, harmless against all damages. diodes incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthor ized sales channel. should customers purchase or use diodes incorporated products for any unintended or unauthorized application, customers shall indemnify and hold diodes incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising ou t of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. products described herein may be covered by one or more united states, international or foreign patents pending. product names and markings noted herein may also be covered by one or more united states, international or foreign trademarks. this document is written in english but may be translated into multiple languages for reference. only the english version of this document is the final and determinative format released by diodes incorporated. life support di odes incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the chief executive officer of diodes incorporated. as used herein: a. life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. b. a critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety - related requirements concerning their products and any use of diodes incorporated products in such safety - critical, life support devices or systems, notwithstanding any devices - or systems - related information or support that may be provided by diodes incorporated. further, customers must fully indemnify diodes incorporated and its representatives against any damages arising out of the use of diodes incorporated products in such safety - critical, life support devices or systems. copyright ? 201 3 , diodes incorporated www.diodes.com
|
